Product Description
Multi-layer Disk Drag
The heart of the Islander TR3 is its all new drag system made from an ultra-high performance drag material known for its low coefficient of friction, durability and consistent performance across wide temperature ranges.
Disks are laser cut then sandwiched between alternating layers of stainless steel. The result is silky smooth performance, zero start-up inertia and more than enough power to stop the hardest fighting chinook. Simply put: it is the finest performing drag system on the market today.
Fully Sealed Drag System
The TR3 uses four O-rings to create an impenetrable barrier, preventing contaminants or corrosion from affecting drag performance. The sealed nature also means that the drag requires virtually no ongoing maintenance to continue performing at its best. Finally, the drag's minimum setting provides enough resistance to eliminate backlash while lowering gear on the downrigger.
Fully Ceramic Bearings
Forgot to clean your reel after a weekend on the water? You no longer need to worry. By using 100 percent ceramic bearings, the TR3 eliminates any possibility of corrosion ensuring that when you do remember to give your bearings a quick tune up they’ll be as good as new.
Ported Paddle Handles
Single action fishing is defined by your direct connection to the fish. Our all-new ported paddle handles bring that connection to a new level. By porting out the centre of each handle, your grip is much more secure, especially when fishing in wet or frigid conditions.
Interchangeable Retrieve
For all the lefties out there who are sick of fishing ‘backwards’ the TR3 has you covered. With a simple procedure, you can reel your reel your way.
| Model | TR3 |
| Diam. | 4.6 in |
| Spool Width | 0.9 in |
| Weight | 17.6 oz |
| Capacity* | 350 yds of 30# monofilament, no backing required |
| Body | 6061-T6 solid billet aluminum |
| Spindle | 316 bar stock stainless steel |
| Rotation | Ceramic ball bearings and self-lubricating synthetic bushing |
| Finish | Anodized (All aluminum parts) |
| Made in Canada | Designed, machined and hand assembled on Vancouver Island. |
* Capacities are subject to the style of the line used.
Limited Lifetime Warranty
Recreational Users
We will repair or replace your TR3 or fly reel in the event it becomes damaged or defective due to material or workmanship. If we cannot repair your reel, we will replace it with a reel of equal or similar value.
Islander will decide if the product is covered under this warranty due to defective workmanship or material. Parts for older products or models not in our current lineup may be replaced with parts for present models. Colours of parts may differ between the replacement and original.
Limited lifetime warranty
- Fully transferable
- No receipt needed
- Covers replacement parts
* Return Shipping and Handling Fee Not included.
Islander’s handling fees cover product inspection, diagnosis, lubrication, and restoration to factory specifications
Islanders Limited Lifetime Warranty is valid only if the reel has been cleaned and maintained according to the maintenance instructions. This warranty does not cover normal wear, misuse, or loss. Nor does this warranty cover damage due to: improper use or improper assembly, improper/inadequate cleaning or improper/inadequate maintenance.
Note: Loss, theft, deliberate damage, or cosmetic damage that does not hinder the performance of the reel are not covered.
Commercial Users (e.g. charter boats, guides, and lodges)
After a period of two years from the date of purchase, should you return your reel for service, a nominal processing and handling fee and the cost of parts will be charged.
A note on maintenance
While you can rely on Islanders to deliver lifelong performance, following the maintenance instructions will keep your reel performing at its best and minimize the need and hassle of sending your reel in for service.
Warranty Information
| SKU | Court | PA | Nan | Dunc |
|---|---|---|---|---|
| ITR3BLUEGOLD | Out of stock | Out of stock | Out of stock | Out of stock |